AJ65SBTB1-32DT3 Mitsubishi CC – Link

Mitsubishi Electric is the manufacturer. No. of product AJ65SBTB1-32DT3. The product is a small remote I/O unit (terminal block, DC input/transistor output) called CC-Link. AJ65SBTB 1-32DT3 DC input format (together with common type) There are sixteen input points. DC 24 V is the rated input voltage (with a 5% ripple ratio). (Voltage range allowed: DC 19.2 to 26.4 V) 5 mA is the rated input current. 100% of the maximum number of input points at once 15 V or greater of both ON voltage and ON current, or 3 mA or more of current / OFF voltage: 0.5 mA or less / 3 V or less Resistance at input around 4.7 kO Response time input 0.2 ms or less (24 VDC) for ON and OFF.0.2 ms or less (24 VDC) for ON and OFF. Method of input isolation isolation of a photocoupler.

Format of output Transistor output—a type of sink There are sixteen output points. voltage of the rated load utilized load voltage range of DC 24V DC 19.2 to 26.4 V (with a 5% ripple ratio) Maximum load current: 3.6 A per common point and 0.5 A per point Less than 10 milliseconds, maximum inrush current of 1.0 A Current leakage at OFF less than 0.1 mA DC 0.6 V or less (MAX.) 0.5 A, DC 0.3 V or less (TYP.) Maximum voltage drop during ON 0.5 A Response time of output OFF? ON in less than 0.5 ms 1.5 ms or less (resistance load) ON? OFF Zener diode surge suppressor.

Section of output external power source DC 19.2 to 26.4 V voltage range (with a 5% ripple ratio) Current when all points are ON is 24.2 mA or less (24 VDC). There is no external load current included. Method of output isolation Isolation of photocouplers Typical technique 32 points, 1 common (one wire type, one terminal trapezoid) withstand voltage AC 500 V for one minute between the DC external terminal and the ground resistance to insulation DC external terminal group to 500 VDC ground Ten MO or more on a DC insulation resistance meter IP2X Station type protection grade Number of occupied stations: 1 remote I/O station Power supply unit DC voltage range of 20.4 to 26.4 V (with a 5% ripple ratio) 60 mA or less of current (24 VDC, all points ON) Method of connecting external wires Section 7: Communication and power supply unit M3 screw terminal block in two pieces 34 locations for the input/output and I/O power supply parts Terminal block for direct mounting (M3 screw) Location of installation: Within the control panel.